Compact P8S AC Clamp CT 5A/10A/20A/30A Permalloy Current Clamp for On-Site Power & Leakage Test

 The lightweight P8S portable clamp-on current sensor is designed for field electric inspection, leakage detection and industrial power monitoring. Equipped with high-permeability permalloy core, it maintains stable, repeatable measurement results with tiny phase shift error, suitable for daily live-line testing without power shutdown.

The slim 8mm jaw clamps small-diameter wires conveniently, with multiple rated current ranges (5A/10A/20A/30A) and optional 1000:1/2000:1/2500:1 transformation ratios to meet diverse test demands. Its broad frequency response guarantees clear harmonic analysis, and multiple signal output connectors allow flexible matching with DMMs, data loggers and power analyzers.

Passed CE, UL and CNAS certification with CAT III 600V overvoltage protection, the robust anti-flame casing adapts tough outdoor working environments from -20°C to +55°C. Bulk customized packages and special probe parameters are supplied for mining enterprises, power engineering teams and electrical maintenance workshops.

View detailed parameter sheets and wholesale pricing: https://www.gfuvegroup.com/ac-current-clamp/high-quality-europe-standard-5a-10a-20a-clamp-on-ct.html

#PortableCurrentClamp #OnSitePowerTest #LeakageCurrentProbe #IndustrialCTSensor #CATIIISafeProbe

S120 3000A CABLE FAULT ANALYSIS CLAMP ON CURRENT TRANSFORMER

The S120 current clamp is a high performance AC Clamp on current transformer probe with excellent transformation and low phase shift. The high quality magnetic permalloy core and uniform windings provide for accurate measurements up to 3000AAC/2000AAC/1000AAC/500AAC. The "ring type" jaw permits good magnetic conduction and cable positionings. Provide excellent RMS capabilities and reliable signal reproduction.

The S120 clamp on ct is well suited for power quality applications where high accuracy and low phase shift along with wide frequency from 10Hz to 2MHz are important. Measurement range is 100mA to 3000A.

The S120 clamp on current transformer is a general purpose 3000A AC clamp current probe transformer designed for use with DMMs & BNC, cable fault analysis and loggers instruments that have a current input. It has a 1000:1 or 2000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The S120 has an integral 2.5m or 5m lead terminated. The rounded jaw design on this clamp probe makes it well-suited for cable fault analysis applications where high accuracy and low phase shift and wide frequency.

APPLICATION

■ Power meter;

■ Cable fault analysis;

■ Large industrial loads;

■ Power load monitoring;

■ Data logging/recording;

■ Energy meter calibrator;

■ Power quality monitoring;

■ Power and harmonic meters;

■ Power quality analyzer (PQA);

■ CT secondary current detection;

■ Measuring around cable bundles;

■ Waveform analysis (oscilloscopes meter);

FEATURES

■ UL, CE CNAS mark;

■ Frequency 10-2MHz;

■ Holding wire diameter: φ120mm;

■ Conforms to EN 61010, 600V CAT III;

■ Low phase shift for power measurement;

■ Industrial design & beautiful appearance;

■ High content nickel metal permalloy core;

■ Measurement range of 1mA to 3000A AC;

■ Transformation ratio: 1000:1, 2000:5, 3000:5;

■ Improved ergonomic design & easy operation;

■ High precision 0.1% for current measurement;

■ Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters;

S50 10M Hz bandwidth 1200A 1mV/A & 1mA/A output AC Current Clamp ON CT Probe

The round jaw design on the S50 Series AC current clamp on CT along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is 1mA to 1200A. The S50 is a general purpose 1200A AC current clamp on CT designed for use with DMMs, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The S50 clamp on CT has an integral 2.5m lead terminated. The rounded jaw design on this current clamp makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.

GFUVE P8 low cost split core current sensor with 2500:1, 10A, 8mm hole, Waveform Analysis

 The P8 current sensor is an affordable & durable mini split core current probe for measurements to 10A AC. Only 180g, it can measure current 0-10 A, max 20A, with class 0.2 accuracy. This low cost current sensor uses a special magnetic core to provide higher accuracy and lower phase shift. The P8 Series AC current probe is a cheap probe to be used in power and low level current measurement applications.